Insulation Accessories
We Supply All Types Of Accessories
Aluminum Elbow covers:
Aluminum Elbow covers from 1100 series aluminum, .024" in thickness, which meets ASTM C-585 standards.
Aluminum Elbow Covers in both 90° and 45° angles, in sizes from #2 - #56 (for 90°) and #1 - #17 (for 45°).
Origin: Canada
Elbows - AA WeatherJacsTM:
AA WeatherJacs™are built to fit like a glove with exact centerline radius and overlap for each size.
AA WeatherJacs™ are available in sizes from 1” through 36” IPS and thickness from 6mm through 48mm.
Origin: Canada
Large Bore Pressed Elbows:
Origin: Canada
Elbows - Stainless Steel
Stainless Steel Elbow Covers produced from T-304 and T-316 Stainless Steel conforming to ASTM C-450/ASTM C-585 standards.
Origin: Canada
Expansion Springs:
Flat expansion springs come in 4” and 2” lengths.
They are made from 300 series stainless steel,therefore able to withstand a variety of weather, environmental and job site conditions.
Origin: Canada
Stainless Steel Strapping - Banding
Stainless Steel Strapping is made from T-340 Series Stainless Steel which meets ASTM A-420 standards.
Origin: Canada
Stainless Steel FabStraps:
Fabstraps made from T-304 Series Stainless Steel.
Fabstraps are supplied at specific lengths with a wing seal attached.
Origin: Canada
Stainless Steel Tie Wire:
Tie Wire is manufactured from T-304 Stainless Steel and is available in both 16 and 18 gauge.
Origin: Canada
Polysurlyn :
Polysurlyn Moisture Retarder is a co-extruded film of DuPont’s Surlyn and Polyethylene.
It is a 3 mil thick moisture barrier that is replacing the former industry standard Polykraft.
Surlyn® is a trademark of the DuPont Company.
Origin: Canada
Wing Seals:
Insulation Wing Seals are available from 0.8/0.9mm Aluminium and Stainless Steel for all sizes up to 25.4mm, 1.6mm material for 40.0mmnand 50.8mm Stainless Steel seals and 3mm material for Aluminium Seals 40.0mm and 50.8mm.
Origin: Australia
Aluminium Sheet:
We can offer Aluminium and Stainless steel Foil and Sheets.
Origin: Australia
Fiberglass Tapes:
We can offer Fiberglass tapes.
Origin:Singapore
Silicone sealant:
BOSS® 391:
Hi-Temp Red Silicone Sealant is a one-part, non- slumping paste that cures to a tough,rubbery solid at room temperature on exposure to water vapor in the air. This silicone product was formulated to perform at temperatures ranging from -85°F to 600°F (-65°C to 316°C)for continuous operation and to 650°F (343°C) for intermittent exposure
BOSS® 395:
Neutral Silicone Sealant is a high quality, low odor, one-part neutral curing sealantthat offers excellent adhesion, compatibility with a wide variety of substrates, and excellent weather ability.
BOSS®GP:
RTV Silicone Construction Sealant is a one-part acetoxy cure adhesive sealant that is suitable for general construction sealing and adhesive applications. A primer may be required for optimum adhesion to some substrates. Cured sealant stays rubbery from -60°F to 400°F.
Origin: USA
